The printer is only the first line of the order. A first print needs filament, a clean plate and somewhere dry to keep the spool, and resin work adds wash liquid, gloves and a cleaning station. Buyers who skip those items tend to place a second order the same week.
Pick what you are setting up for and a price band. You get one kit of five to nine items: the printer, the supplies it runs on and one storage or safety item. Every item has a one-line reason and a number that points to the maker page behind it. Nobody here has run any of this gear, so the reasons repeat what the makers publish.
Two buttons do the buying. “Add the whole kit to your Amazon cart” sends every item with an exact Amazon listing to your cart in one step. You can still open any single item from its own link. Where we have no exact listing, the item gets a labeled Amazon search link and stays out of the cart.
As an Amazon Associate, we earn from qualifying purchases. Links open Amazon in a new tab.
Price bands compare the three kits with each other, not with a current price. Check each Amazon listing before you buy, because prices and stock change.
First printer, PLA hobby
A beginner-friendly printer, two PLA colors and the basics that keep prints coming off the plate cleanly.
Lean kit $
Smallest build volume of the three; the A1 mini is open-frame, so stick to PLA, PETG and TPU.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab A1 mini (with LED lamp kit) | 180 mm cube open-frame printer; Bambu lists PLA, PETG, TPU and PVA as supported and ABS, ASA, PC and PA as not recommended. [1] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | Sterilite 37 qt gasket box | A gasket-sealed bin keeps spools away from room humidity; the IRIS page describes the lid seal that does this. Search link, not in the cart. [10] | Search Amazon |
Add the whole kit to your Amazon cart 4 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Balanced kit $$
The full-size open-frame Bambu with a dryer added, for a hobby that will print PETG and TPU too.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab A1 | 256 mm cube open-frame printer with full-auto calibration, so setup needs no manual tuning. [2] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Must-have accessory | SUNLU FilaDryer S2 | Single-spool dryer and storage box that heats to 70 C and shows humidity, for filament that has sat out. [8] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 6 items go in the cart. Review the cart on Amazon before you buy.
Step-up kit $$$
An enclosed printer that Bambu pitches for tougher filaments; the kit swaps in the sealed PolyDryer.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab P2S | Fully enclosed chamber and hardened steel nozzle, for a PLA hobby that may grow into tougher filaments. [3] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Must-have accessory | Polymaker PolyDryer | Dryer and sealed storage box for one spool up to 205 mm across and 78 mm wide, per the Polymaker manual. [9] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 6 items go in the cart. Review the cart on Amazon before you buy.
Multicolor printing
A printer that holds several spools at once, two filament colors to start, and a place to store the spools.
Lean kit $
The AMS lite feeder is included in the Combo listing.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab A1 Combo + LED lamp kit (with AMS lite) | The A1 sold with an AMS lite filament feeder in the box, so multicolor prints work from day one. [2] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | Sterilite 37 qt gasket box | A gasket-sealed bin keeps spools away from room humidity; the IRIS page describes the lid seal that does this. Search link, not in the cart. [10] | Search Amazon |
Add the whole kit to your Amazon cart 4 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Balanced kit $$
No separate dryer here: the AMS 2 Pro in the Combo is Bambu's drying and feeding box.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab P2S Combo (with AMS 2 Pro) | Enclosed P2S sold with the AMS 2 Pro multicolor system, which Bambu pitches as printing and drying in one box. [3] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 5 items go in the cart. Review the cart on Amazon before you buy.
Step-up kit $$$
A four-toolhead machine. Check Snapmaker's page for supported materials before you buy filament.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Snapmaker U1 | Four toolheads that swap in about 5 seconds; Snapmaker advertises minimal purge and up to 85% less waste. [4] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Must-have accessory | Polymaker PolyDryer | Dryer and sealed storage box for one spool up to 205 mm across and 78 mm wide, per the Polymaker manual. [9] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 6 items go in the cart. Review the cart on Amazon before you buy.
Resin minis
A resin printer for tabletop miniatures, the resin and wash liquid, a station for cleaning and curing, and gloves.
Lean kit $
One bottle of standard resin keeps the first order small.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Elegoo Mars 5 | Entry resin printer with a 143.43 x 89.6 x 150 mm build volume, enough for single miniatures. [11] | View on Amazon |
| Filament, resin or supply | Elegoo Standard Resin V2.0, gray, 1 kg | Standard resin that Elegoo says cleans up with isopropyl alcohol or ethanol, so no special wash liquid is needed. [14] | View on Amazon |
| Must-have accessory | Elegoo Mercury Plus V3.0 wash and cure station | All-in-one wash and cure; its brackets fit build plates up to 10 inches, which covers these Elegoo printers. [16] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | The wash liquid for standard resin, which Elegoo says cleans with isopropyl alcohol or ethanol. [14] | View on Amazon |
| Safety or storage | Nitrile gloves for resin work | Anycubic's resin page says to always wear nitrile gloves and goggles. Search link, not in the cart, because glove size varies. [17] | Search Amazon |
Add the whole kit to your Amazon cart 4 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Balanced kit $$
Adds a tougher second resin for pieces that get handled.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Elegoo Mars 5 Ultra | 153.36 x 77.76 x 165 mm build volume, 18 micron XY resolution and auto leveling for miniature detail. [12] | View on Amazon |
| Filament, resin or supply | Elegoo Standard Resin V2.0, gray, 1 kg | Standard resin that Elegoo says cleans up with isopropyl alcohol or ethanol, so no special wash liquid is needed. [14] | View on Amazon |
| Filament, resin or supply | Siraya Tech Fast ABS-like resin, gray, 1 kg | A tougher resin for minis that get handled; Siraya lists 20% elongation at break. [15] | View on Amazon |
| Must-have accessory | Elegoo Mercury Plus V3.0 wash and cure station | All-in-one wash and cure; its brackets fit build plates up to 10 inches, which covers these Elegoo printers. [16] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | The wash liquid for standard resin, which Elegoo says cleans with isopropyl alcohol or ethanol. [14] | View on Amazon |
| Safety or storage | Nitrile gloves for resin work | Anycubic's resin page says to always wear nitrile gloves and goggles. Search link, not in the cart, because glove size varies. [17] | Search Amazon |
Add the whole kit to your Amazon cart 5 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Step-up kit $$$
The largest plate of the three, for batches of miniatures.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Elegoo Saturn 4 Ultra 16K | 211.68 x 118.37 x 220 mm build volume and a tank heater that holds resin at 30 C, for batches of minis. [13] | View on Amazon |
| Filament, resin or supply | Elegoo Standard Resin V2.0, gray, 1 kg | Standard resin that Elegoo says cleans up with isopropyl alcohol or ethanol, so no special wash liquid is needed. [14] | View on Amazon |
| Filament, resin or supply | Siraya Tech Fast ABS-like resin, gray, 1 kg | A tougher resin for minis that get handled; Siraya lists 20% elongation at break. [15] | View on Amazon |
| Must-have accessory | Elegoo Mercury Plus V3.0 wash and cure station | All-in-one wash and cure; its brackets fit build plates up to 10 inches, which covers these Elegoo printers. [16] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | The wash liquid for standard resin, which Elegoo says cleans with isopropyl alcohol or ethanol. [14] | View on Amazon |
| Safety or storage | Nitrile gloves for resin work | Anycubic's resin page says to always wear nitrile gloves and goggles. Search link, not in the cart, because glove size varies. [17] | Search Amazon |
Add the whole kit to your Amazon cart 5 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Buying for someone
For a first-time maker who has not picked a printer yet. Everything on the list arrives ready to start, with no extra tools to hunt down.
Lean kit $
A small, quiet-to-use printer plus two colors, so there is something to print on day one.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab A1 mini (with LED lamp kit) | 180 mm cube open-frame printer; Bambu lists PLA, PETG, TPU and PVA as supported and ABS, ASA, PC and PA as not recommended. [1] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Must-have accessory | SUNLU FilaDryer S2 | Single-spool dryer and storage box that heats to 70 C and shows humidity, for filament that has sat out. [8] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | Sterilite 37 qt gasket box | A gasket-sealed bin keeps spools away from room humidity; the IRIS page describes the lid seal that does this. Search link, not in the cart. [10] | Search Amazon |
Add the whole kit to your Amazon cart 5 items go in the cart; 1 search link is not added because we have no exact listing for it. Review the cart on Amazon before you buy.
Balanced kit $$
The A1 gives the recipient room for bigger projects.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab A1 | 256 mm cube open-frame printer with full-auto calibration, so setup needs no manual tuning. [2] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Must-have accessory | SUNLU FilaDryer S2 | Single-spool dryer and storage box that heats to 70 C and shows humidity, for filament that has sat out. [8] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 6 items go in the cart. Review the cart on Amazon before you buy.
Step-up kit $$$
The enclosed pick for someone you expect to keep printing.
| Slot | Item | Why it is in the kit | Amazon |
|---|---|---|---|
| Printer | Bambu Lab P2S | Fully enclosed chamber and hardened steel nozzle, for a PLA hobby that may grow into tougher filaments. [3] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Basic, 1 kg spool (Jade White) | 1.75 mm PLA that Bambu lists as AMS-compatible and certified to UL GREENGUARD 2904 for low indoor emissions. [5] | View on Amazon |
| Filament, resin or supply | Bambu Lab PLA Matte, 1 kg | A second 1.75 mm PLA in a matte finish, AMS-compatible per Bambu, so a first project can use two colors. [6] | View on Amazon |
| Must-have accessory | Polymaker PolyDryer | Dryer and sealed storage box for one spool up to 205 mm across and 78 mm wide, per the Polymaker manual. [9] | View on Amazon |
| Filament, resin or supply | Amazon Basics 99% isopropyl alcohol, 16 fl oz | For wiping the build plate before a print; Prusa's first-layer guide recommends 90% isopropyl alcohol for that job. [7] | View on Amazon |
| Safety or storage | IRIS USA WeatherPro 41 QT gasket box (4-pack) | Gasket-sealed boxes for spools; IRIS says the lid seals block out moisture and dust. This listing is a 4-pack. [10] | View on Amazon |
Add the whole kit to your Amazon cart 6 items go in the cart. Review the cart on Amazon before you buy.
Sources
- Bambu Lab A1 mini product page: build volume and supported filament list
- Bambu Lab A1 product page: build volume, full-auto calibration, Combo with AMS lite
- Bambu Lab P2S product page: enclosed chamber, hardened steel nozzle, P2S Combo with AMS 2 Pro
- Snapmaker U1 product page: four-toolhead tool changer and purge claims
- Bambu Lab PLA Basic product page: diameter, AMS compatibility, emissions certification
- Bambu Lab PLA Matte product page: diameter and AMS compatibility
- Prusa Research first-layer troubleshooting: cleaning the print surface with isopropyl alcohol
- SUNLU FilaDryer S2 product page: 70 C maximum, drying and storage box, humidity display
- Polymaker PolyDryer user manual: spool capacity
- IRIS USA WeatherPro 41 QT gasket box: lid seals against moisture and dust
- Elegoo Mars 5 product page: build volume
- Elegoo Mars 5 Ultra product page: build volume, 18 micron XY, auto leveling
- Elegoo Saturn 4 Ultra 16K product page: build volume and tank heating
- Elegoo Standard Resin V2.0 product page: cleaning with isopropyl alcohol or ethanol
- Siraya Tech Fast ABS-like resin page: elongation at break
- Elegoo Mercury Plus V3.0 product page: build plates up to 10 inches
- Anycubic Water-Wash Resin 2.0 page: nitrile gloves and goggles
How the kits are built
Each kit has a printer, the supplies that printer uses up, and a storage or safety item. The three bands step up in printer size, enclosure or how much the printer automates. They do not promise better prints. Several items repeat across kits on purpose: if the same wash station fits two printers, it appears in both.
Printers and supplies come from the models we already compare on this site. For a full comparison, start with the best 3D printers for beginners , the best multicolor 3D printers or the best resin 3D printers . For a different approach, the 3D printer finder narrows printers by size, enclosure and working style.